General industrial transmission belts, pulleys and related products
General industrial transmission belts

Standard Type

Classical V-belt

Classical V-belt are the most widely used power transmission belts.
Economical and easily obtained for replacement.
Wrapped type : M (Z) / A / B / C / D / E
Raw Edge type : ZX / AX / BX / CX

Classical V-belt

MAXSTAR WEDGE V-belt

Maxstaer Wedge V-belts have double power transmission capacity of Classical V-belts due to greater wedge effect. It features high speed transmission, energy saving, and compact design.
Wrapped type : 3V / 5V / 8V
Raw Edge type : 3VX / 5VX

MAXSTAR WEDGE V-belt

MAXSTAR WRDGE pulley/bracketMAXSTAR WEDGE pulley/bushing

MAXSTAR WEDGE SUPREME

MAXSTAR WEDGE SUPREME is manufactured as a raw edge cogged type. This belt is mainly used for machinery and equipment made overseas.

MAXSTAR WEDGE SUPREME

MAXSTAR WEDGE pulley/bushing

Attached to the axis with 1 spanner, the pulley for MAXSTAR WEDGE V-belt uses a bushing system that can be removed.

* Pulley can be converted to use with MAXSTAR WEDGE V-belt and MAXSTAR WEDGE SUPREME

MAXSTAR WRDGE pulley/bracket

With the Bushing System

A system that can be easily fitted by installing the axis to the rotating pulley, coupling, gear, sprocket foil, etc.

Benefits

  • Mounting a spanner to the pulley shaft is simple to install or remove, and because removal is also easy, there is a decrease in man hours.
  • Shaft hole manufacturing is unnecessary. Because the shaft hole corresponds with the standard axle diameter, the key groove manufacturing at the time of use is not required

Narrow V-belt

Narrow V-belts was developed to transmit a higher torque in a small assembly area, which enables space saving, high speed drive, and reduce the cost of operating and maintenance.
oil/ heat resistance and electrical conductivity.
Wrapped Type: SPZ / SPA / SPB / SPC
Raw Edge Type: SPZX / SPAX / SPBX / SPCX

Narrow V-belt

MAXSTAR POWER Narrow

The MAXSTAR POWER was developed for heavy duty applications, where high torque transmission is required. Its performing level increased more than 50% compared to the standard specification.

MAXSTAR POWER Narrow

MAXSTAR POWER (Type: HA, HB = Multiple type)

The HA and HB type of MAXSTAR POWER is made up of two or more standard V-belts connected together at the top. It was developed to satisfy the special requirements for the agricultural machinery like harvesters and combines.
Multiple Type: HA / HB

MAXSTAR POWER (Type: HA, HB = Multiple type)

SUPER KB

The SUPER KB is mainly used for light duty applications, but has more resistance to heavy shock loads than FHP belts. The special outer covering is suitable for backside idler usage. These belts have high resistance to heat, high humidity, oil, and cracking.
TYPE: 3LK / 4LK / 5LK

SUPER KB

SUPER WEDGE II

The MAXSTAR SUPER WEDGE II is one of our latest development for heavy loading duty applications, where high torque transmission is required. Not does only it withstand shock loads easily, but special fabric allows slippage and avoids further damages in the complete power train.

SUPER WEDGE II

TRIPLEX

The TRIPLEX is suitable for applications with small pulley diameters and provides higher coefficient of friction against the standard wrapped belts. It is widely-used for its cost efficiency, availability, and its simplicity of replacement.
Raw Edge type : AX / BX / CX

TRIPLEX
Page Top