Mitsuboshi Technical Support

Belt type Timing Belt

Please enter a number in the blank.

Specification
Tooth profile
Belt width mm
Number of teeth on large pulley
Number of teeth on small pulley
Revolution of small pulley rpm
Center distance mm

Calculation results

Initial tension (min) 0.00N
Initial tension (max) 0.00N
Static shaft load (min) 0.00N
Static shaft load (max) 0.00N
Deflection 0.00mm
Deflection load (min) 0.00N
Deflection load (max) 0.00N

Note : The values are reference only.

Page Top